Double Knit Softshell Fabric

How is it made?

Unlike regular single jersey that curls at the edges, this fabric is produced on double knit circular machines . Two yarns interloop simultaneously, creating a structure where both sides look and behave the same. The result:

• No edge curling – lays flat on the cutting table
• No skewing – stays square after washing or stretching

Why 75D/36F polyester?

• 75D – medium thickness, gives you that 110 GSM sweet spot
• 36F – 36 fine filaments per yarn, softer and more uniform than lower-filament counts
• Polyester – wrinkle-resistant, quick-drying, abrasion-resistant, cost-effective

Who is this NOT for?

Two types of buyers should look elsewhere:

• Those needing high-stretch fabric for activewear (this has low elasticity)
• Those needing a heavy outer shell fabric (this is lightweight, designed for linings and base layers)

This fabric IS for: workwear linings, bag linings, digital printing base fabrics, cushion covers, and laminated composites.

Technical Specifications 

7 Performance Features You Should Know

1. Flatness
The double-knit structure delivers real value here. Lay it on your cutting table – corners stay down. Works perfectly with auto-cutters and manual spreading.

2. Dimensional stability
Shrinkage under 3%. What that means for you: garments won't pucker after washing. Bag linings won't come up short.

3. Print-friendly surface
Tested with digital direct printing, heat transfer, and screen printing. The uniform surface means no patchy absorption. One print shop switched to this fabric specifically because their rejection rate dropped.

4. Lamination compatibility
If you're bonding with TPU, PU, or other face fabrics, this base fabric's low shrinkage and flat surface = fewer bubbles, less delamination. Simple physics – the more stable the base, the stronger the bond.

5. Sewing experience
Ask any production supervisor – this matters. Our fabric:

• Doesn't slip on the feed dog
• No thread skipping
• Needle holes close up cleanly
• Works on automatic spreading machines

6. Durability
110 GSM sounds light, but polyester filament has real tear strength. For bag linings: holds up under heavy loads without ripping at the seams. For garment linings: years of use without breaking down.

7. Low maintenance
Easy to wash, fast-drying, no ironing needed. Garment factories save on finishing time. End users just wash and hang.

4 Industries Using This Fabric

Application 1: Garment Linings

Best for: Workwear jackets, uniforms, outdoor shells, insulated coats

Why this fabric:

• Lays flat and stays put
• Smooth against sweaters or bare skin
• High color fastness – dark linings won't stain light outer fabrics

What customers say: "Our old single jersey lining curled within hours of cutting. This one changed our production flow."

Application 2: Bag Linings

Best for: Backpacks, laptop bags, luggage interiors, cosmetic pouches

Why this fabric:

• Light but tough – adds structure without weight
• Tear-resistant – laptop compartments stay intact
• Printable – add your brand pattern

What customers say: "We tried four other lining fabrics. Too soft, too stiff, or hard to sew. This one hit the mark."

Application 3: Digital Printing Base Fabric

Best for: Custom printed apparel, printed cushion covers, event bags

Why this fabric:

• Consistent whiteness – colors print true
• Even ink absorption – no bleeding or spotting
• Washes without fading

What customers say: "We do short-run custom garments. Tried several base fabrics. This one gives us the highest yield."

Application 4: Home & Cushion

Best for: Sofa cushions, office chair covers, automotive interior base

Why this fabric:

• Abrasion-resistant – no pilling from daily use
• Moderate breathability – won't trap heat
• Can be finished with stain repellent

About Ningbo Nashe Textile – Not the Biggest, But We Take Responsibility

What we do

Knitted and composite fabrics, exported to Europe, North America, and Southeast Asia. We're a factory, not a trading company. We knit, we dye, we control quality.

How we control quality

What if something goes wrong?

The fabric arrives at your factory and there's an issue? Two scenarios:

• Our fault – we compensate or replace
• Process mismatch – we help troubleshoot at no charge

We don't treat customers as one-off deals.

Working Process 

Step 1: You share your needs – application, target weight, quantity, special finishing

Step 2: We recommend the right spec and give a real price (no inflated quotes)

Step 3: We send samples – you test on your own machines

Step 4: You confirm – we produce (15–25 days)

Step 5: Shipment + documentation support

Step 6: After-sales support if needed

Frequently Asked Questions

Q1: How many meters per roll?
Usually 30–40 meters per piece, multiple pieces per roll. We can also cut to your specified length.

Q2: Can I get an A4 sample?
Yes. Free A4 sample, you pay shipping. Full-yard sample is charged but refunded on bulk order.

Q3: How much extra for water-repellent finishing?
Depends on quantity and chemical type. We'll quote actual cost – no markup games.

Q4: Can you do anti-static?
Yes. For ESD-safe workwear or cleanroom environments. Add conductive yarn or anti-static finish.

Q5: What's the difference between buying from you vs a trading company?
You talk directly to the factory. Delivery, quality, pricing – no middle layer.

Q6: I'm nervous about first-time cooperation.
Start small. Trial order accepted. Quality standards written into contract. We deliver what we promise.

Q7: Can you print my logo on the selvedge?
Yes. There's a one-time engraving fee, amortized across long-term orders.